 |
|
|
|
|
|
|
|
|
|||||||
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
|
|
|
|
 |
|
Report
B-100-L Published monthly, The Bishop Report is one of the best and most relied upon sources of information on the world connector industry. Each year, Bishop & Associates analyzes the North American, Japanese, Asia-Pacific, and European electronic connector markets by region, country, end-use equipment, and product line. Additionally, The Bishop Report provides detailed forecasts for each of these world connector markets. Another important feature of The Bishop Report is the How's Business updates on the performance and profitability of the connector industry. Each quarter, Bishop & Associates recaps' information derived from public and proprietary sources to provide the industry with current, and projected trends in both sales and profits. Connector News Briefs
(50 to 75 News
Briefs a Year) are
emailed to you when
important news events occur that influence the connector industry. This service is free
with your subscription to The Bishop Report and Connector Industry Yearbook.
Report
# P-799-12 Bishop
& Associates Inc. has just released a new market research report on the
world cable assembly market for 2011. This 18-chapter, 260-page report
provides a detailed analysis of the dollar value of major cable assembly
types found in each end-use market sector, and further cross-analyzes
the market value by Region of the World, Market Sector, and Cable
Assembly Type. For a complete overview of the this report, click here. If you would like to place an order for this report, go to our order form.
Report
P-675-12
For a complete overview of
Rugged Connectors Meet Emerging Application Challenges
click here.
Report
T-910-12 The five-year forecasts include many permutations:
Within the datacom market, Ethernet remains the most pervasive networking technology, with Fibre Channel second and InfiniBand third. It is anticipated that by as soon as 2012, InfiniBand will surpass Fibre Channel due to its increasing penetration into the high performance computing sector, and because of its adoption into low-latency applications such as financial trading. Still, by 2015, it will only be about one-fifth that of the Ethernet market as shown in the following tables. Data Communications
Connectors and Cable Assemblies
|
|
|
Report
M-990-12
World
Military Market for Connectors
Print Copy
$3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published January 2012
Bishop & Associates Inc. has just released a new report
providing a quantitative analysis of the World Military Connector
Market. This 16 chapter, 315-page research report identifies current
major military programs and future applications with high growth
potential, and provides a breakdown of the market value for connectors
by region, by type, and wherever possible, by application. Connector
sales and forecasts are presented for the years 2009, 2010, and 2015.
Market segments include:
-
Military Avionics
-
Missile Systems
-
Space Systems
-
Land Forces
-
C4I Systems
-
Naval Vessels
-
Unmanned Vehicles
The military and aerospace industry
is a valuable economic asset and a major source of employment, exports,
and technology advancement. As with most industries, it requires
competition and investment remain vital and advance. Unlike other
industries, defense business depends critically on governments in their
role as regulators, customers, and investors. On average, over the last
five years, governments worldwide have consistently spent 2.7% of their
global gross domestic product on military expenditures.
North America, which represented 47.1% of all connector sales in the
military/aerospace sector in 2010, is by far the driving factor behind
connector sales in this sector. North America has consistently had the
greatest sales of connectors used in the military sector and had the
second-largest year-to-year growth. China ranked last in connector sales
to the military sector, and exhibited the greatest growth.
World 2009 and 2010 Military Connector Sales by Region
For a overview of The World Military Connector Market, click here. If you would like to place an order for this report, go to our order form.
|
|
Report M-2810-11
The World Rail Market for Connectors
Print Copy $3.950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published November 2011
Bishop and Associates has just released a new fourteen chapter
research report providing a comprehensive analysis of the worldwide
connector market for rail. This new report furnishes detailed statistics on
4 key segments of the rail industry; rolling stock, rail control,
aftermarket and infrastructure. In addition, detailed information covering
rail road and key technology trends, as well as application information is
provided.
In 2010, nearly $100 billion (USD) were spent and or invested in the global
rail industry. Characterized by a manufacture locally – compete globally
environment, ten globally positioned Companies, across the 4 key segments
drive/influence the greatest application of technology for the entire rail
industry. With 85% of the market represented by 5 countries/regions, the
rail industry is anticipated to demonstrate steady growth with less
volatility in connector demand than other markets.
For a overview of this research report,
click here. If
you would like to place an order for this report, go to our order form.
|
|
Report M-720-11
2011 European Connector Market Handbook
Print Copy $3.950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published October 2011
Bishop and Associates has just
released the first edition of the
European Connector Market Handbook - 2011.
This comprehensive six-chapter, 249-page report analyzes all aspects of the
European electronic connector market. The report provides detailed connector
statistics by equipment sector and product category for the region and 19
individual countries. Data is provided for the years 2005-2010, and
projections for 2015 (including five-year CAGRs).
The countries covered by the report are: Austria, Benelux, Bulgaria,
Czech Republic, Finland, France, Germany, Hungary, Ireland, Italy, Poland,
Romania, Slovakia, Iberian Peninsula, Switzerland, Turkey, United Kingdom,
Scandinavia and the group Other countries.
For a overview of this research report,
click here. If
you would like to place an order for this report, go to our order form.
|
|
Report C-141-11
The World's Connector
Companies
(2 Volumes)
Print Copy
$4,500
Print Copy + 1 Additional Print Copy $4,950
Print Copy + CD (Multi-User Corporate License) $5,850
Published September 2011
Bishop and Associates has just released a two
volume, 905 page research report providing a one-source list of the world’s
electronic connector companies. This report is published annually to
incorporate new companies, and update information relating to companies
listed in the previous issue.
The report provides company name, address, phone, fax and website URL for
the connector companies listed in the report. Company profiles include a
description of the company, including products and trademarks, plant
locations, sales by geographic region and sales by market.. For a overview of this research report,
click here. If
you would like to place an order for this report, go to our order form.
|
|
Report
T-900-11
World Telecom
Market For Connectors
Print Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published August 2011
The World Telecom Market for Connectors provides a new, in‐depth
analysis of the world telecommunications and data communications market
for connectors from 2010 to 2015. The 257 page report is organized
around the six major market segments which include enterprise network
equipment, wireless infrastructure equipment, wireless subscriber
equipment, wireline carrier equipment, cable/MSO equipment and other
telecom equipment.
For each market segment, the strategic implications of economics,
competition, industry consolidation, convergence and technology advances
are examined with respect to their impact on the evolving architectures,
corresponding evolution of the equipment design and connectors.
For each major market segment, the subset of equipment is identified by
equipment type and is characterized by where the equipment resides in
the evolutionary process (legacy, transitional or next generation) and,
key packaging and interconnection characteristics/trends. Five-year
connector sales are identified by connector type for each subset of
equipment.
The following are some key points from the Executive Summary:
-
From 2009, the market grew 21.2% in 2010 to a connector value of nearly $7.4 billion.
-
The single largest influence on the telecom/datacom market is the Internet. From 2000 to 2010, worldwide Internet usage increased from 361,000 users to 1,966,515,000.
-
In 2000, the global IP traffic equaled 95.5 Petabytes per month, an average of 0.26 Gigabytes per user. In 2010, this traffic has increased to 21,380 Petabytes per month, an average of 10.9 Gigabytes per user.
-
The second largest factor influencing the telecom/datacom market is hand-held wireless devices including cell phones, smartphones, and broadband devices. In 2010, according to the International Telecommunication Union, there was 5.3 billion mobile cellular subscriptions worldwide. That is approximately 76% of the world population.
These two factor are
driving are driving the growth of the telecom/datacom market,
particularly wireless infrastructure equipment.
For a complete overview of the this report,
click here. If you would like to
place an order for this report, go to our
order form.
|
|
Report M-121-11
2011 Top
100 Connector Manufacturers
Print Copy
$3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published July 2011
Bishop and Associates has just released a new ten chapter research
report providing a complete analysis of The World’s Top 100 Electronic
Connector Manufacturers. This new report furnishes detailed statistics
that benchmark the leading connector manufacturers by 2009/2010 total
sales, sales by end-use equipment market, sales by product category, and
many other key industry measurements. All manufacturers are exhibited by
2010 sales, and are ranked by region of the world with percent
year-to-year change. This report provides all the key data needed to
analyze each of the top 100 worldwide electronic connector suppliers.
The world’s top 100 connector manufacturers recorded 2010 shipments of
$39.527 billion. This represented 87.2 percent of the worldwide
connector market. The balance of the connector industry had 2010
shipments of $5.815 billion, and represented 12.8 percent of the total
market.
We have identified over 825 connector manufacturers. Many are small with
a highly focused product offering, while others support niche markets or
specific regions. We continue to discover additional connector
companies, especially in China and other developing countries.
For a overview of this research report, click here. If you would like to place an order for this
report, go to our order form.
|
|
Report F-2011-1
Connector Industry
Forecast
Print Copy
$2,950 per issue
Print Copy + 1 Additional Print Copy $3,245
Print Copy + CD (Multi-User Corporate License) $3,835
Published June 2011
|
For a complete overview of the this report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # M-700-11
2011 Connector
Market Handbook
Print Copy
$3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published April 2011
Bishop and Associates has just released the new 2011
edition of the Connector Market Handbook. This comprehensive
seven-chapter, 224-page report analyzes all aspects of the world
electronic connector market.
This report provides detailed connector statistics by equipment sector and product category for North America, Europe, Japan, China, Asia Pacific, and the ROW region.
Included is a complete chapter on worldwide connector industry results by region, equipment sector and product category. Data is provided for the years 2000-2010, and projections for 2015 (including five-year CAGRs).
For a overview of the Connector Market Handbook, click here. If you would like to place an order for this report, go to our order form.
|
|
I-3030-11
Indian
Connector Market: 2009, 2010-2014
Print
Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published April 2011
On the basis of thorough
research of the local industry, including international and local
connector manufacturers, Bishop & Associates has recently published a
new research report on the Indian Connector Market. The report
illustrates clearly which industries are beginning to develop and how
the connector industry in India differs from other regions in the world
in terms of end—use equipment and overall product mix.
Based on the researched data Bishop & Associates developed three
possible growth scenarios for the Indian Connector Market. The Indian
connector market may well reach a five-year compound average growth rate
between 2009 and 2014 of 14.5 to 23.4 percent depending on the growth
scenario that will develop. Whatever the outcome, the Indian connector
market will be worth at least well over US$1.1 billion by 2014 and that
alone justifies a closer look at the Indian Connector Market.
This report provides a comprehensive analysis of the Indian Connector
Market detailing connector consumption by market sector, with details by
end-use equipment sector and connector product type. The report covers
sales to market data for the years 2009, 2010, and a 2014 forecast.
In addition the report provides detailed company profiles for
over 40 Indian connector companies, an insight in the manufacturing
footprint in India of leading international connector manufacturers and
their estimated revenues in the Indian Connector Market.
For a
complete overview of the this report,
click here.
If you would like to place an order for this report, go to our
order form.
|
|
Report # T-800-11
North American
Cable Assembly Manufacturers
Print
Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published March 2011
Bishop & Associates Inc. has just released a new 750 page, two volume
North American Cable Assembly
Manufacturers report. The report contains profiles on 728
companies in the United States and Canada including: company name,
address, phone number, business manager, website, estimated 2010
worldwide revenues, manufacturing locations by region of the world,
markets served, product types manufactured, agency
approvals/certifications, and description of the business. The report
also contains a high level analysis and summary of the information
collected.
Total worldwide sales of the companies identified in the report are
$35,740 million. There are 736 business identified in the report, 8 of
which are divisions of larger companies under which they are profiled.
696 of the businesses were located in the United States and 40 in
Canada. 46 companies have operations in Mexico and 80 have operations
in China/Asia Pacific. 76% of the total revenues identified in the
report come from 1% of the businesses.
For a complete overview of the this report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # M-800-11
The World
Consumer Electronics Market for Connectors
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published February 2011
Bishop & Associates has just released an eight chapter report
covering market trends and outlooks for the Consumer Electronic Products
Market. The purpose of this report is to provide:
-
A comprehensive set of baseline numbers on consumer electronic products – in units of equipment, by region of the world, that can be used to forecast connector companies TAM/SAM in applicable connector products.
-
Input on Consumer Electronics (CE) equipment, across official market segments that operate in the consumer space: home appliance (expanded definition), home/home-office computer equipment, and consumer electronic products.
-
Market segment connector TAMs in dollars for regions of the world.
For a complete overview of the this report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # P-675-11
Fiber
Optic Connectors in Military and Commercial Applications
Print Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published January 2011
Bishop
& Associates has just released a new 13-chapter research report
exploring the rapidly evolving technology and interface components
supporting data transmission via optical fiber. This report includes a
tutorial addressing the basics of optical transmission, as well as a
review of current and recently announced connectors offered by leading
suppliers. Typical applications in both military and commercial are
discussed.
Fiber optic links offers nearly unlimited high-speed bandwidth, improved
signal density and immunity to EMI, and crosstalk; all factors that are
highly desirable in today’s advanced communications and computing
equipment. Fiber strands the size of a hair can convey hundreds of
high-speed signals replacing bulky and heavy copper cables. The ability
to transmit signals many kilometers without amplification was
immediately adopted by the telecom industry in long-haul applications,
but wide market adoption in additional market segments has stumbled due
primarily to cost.
The immanent demise of copper has been predicted many times over the
years, but a combination of advanced chip technology together with
improvements in design for signal integrity has allowed engineers to
find ways to expand the practical bandwidth of copper. Costs associated
with the required electro-optic conversion process together with
connectors that require skilled technicians to successfully terminate
discouraged broad market conversion to fiber.
For an overview of this new report, click here.
|
|
Report #
R-2015-08
The Future of
Electronics Manufacturing in North America - Impact on Connectors
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published January 2008
Bishop and Associates has just released a new six-chapter research
report, The Future of Electronics Manufacturing in North America –
Impact on Connectors. This new report profiles the North American
electronics manufacturing industry and its electronic connector market.
Some elements of this report were several years in the making, drawing
on our analyst’s long experience in the electronics industry, North
America’s multiple phases of off-shoring, outsourcing, and involvement
in government/industry initiatives that have attempted to address the
globalization issue as it impacts the domestic manufacturing market, yet
strengthens North American OEM’s global competitiveness.
The report’s foundation includes eight years of experience compiling the
Connector Roadmap with the International Electronics Manufacturing
Initiative. It also includes extensive experience in the industry,
including NIST’s Advanced Technology Program, the Department of Commerce
and Census Bureau data, IEEE National Innovation Forum, DARPA, and other
U.S. competitiveness initiatives.
Main Points of Interest
Continuing trends in outsourcing and off-shoring.
Growth in emerging markets, particularly China.
Low-to-negative growth in some domestic markets (based on where
equipment is manufactured).
Issues relating to domestic manufacturing infrastructure.
Detailed connector industry forecasts and cyclical scenarios.
Potential government and private sector actions.
For a overview of The Future of
Electronics Manufacturing in North America - Impact on Connectors,
click here. If you would like to place an order for this report, go to our order form.
|
|
Research Report
D-100-10
The
World Distribution Market for Connectors
Print Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published November 2010
Bishop and Associates has just released a new nine-chapter
research report analyzing the World Distribution Market for
Connectors. This 329-page report provides a comprehensive analysis
of the distribution market for connectors through both the POP
(connector manufacturers’ sales to distributors) and POS
(distributor sales to OEMs and CEMs) channels. POP and POS sales are
provided for the years 2004 through 2010, and a 2014 forecast.
Distribution accounts for a large share of the
connector market.
The world connector industry will achieve sales of $42,956 million
in 2010, an increase of +24.9 percent over 2009. Distribution will
account for 21.8 percent of the world market this year. In regions
with well-established distributor presence and business models such
as Europe and North America, distribution accounts for 31.2 percent
and 32.5 percent of total sales respectively.
The following table identifies the size of the 2010 distribution
connector market (POP) by geographic region.
2010
Distribution Connector Sales by Region
With Percent of Total Region Sales
Distribution’s share of the connector
market has increased steadily from 2004, when it accounted for only 19.1
percent of world connector sales. In our opinion, distribution’s share
of the total market will continue to increase as customers in fast
growing economies, such as China and India, embrace the value
proposition that distribution provides.
For a overview of this research
report, click here. If you would like
to place an order for this report, go to our
order form.
|
|
Research Report
P-606-10
Connector Types And Technologies Poised For Growth
Print Copy $3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published February 2010
Bishop and Associates,
Inc. has just released a 23 chapter report providing a detailed analysis
of Connector Types and Technologies Poised for Growth. This new report
addresses a list of 19 specific connector types that are expected to
experience greater than average growth in either volume or sales based
on the rapid expansion of markets for existing and new products that
utilize these interfaces. New technologies already driving the market
as well as emerging technologies that are poised to influence connector
design and/or application are reviewed. A discussion of market trends
that are changing the way electronic connectors are used is included.
Each connector type is defined with a product description including key
mechanical and electrical performance characteristics, as well as the
rational for its selection. Typical applications are also identified. A
global market value and forecast to 2013 documents our growth
expectations for each connector type.
Many of the selected interfaces have existed in the market for several
years, but emerging applications will propel their growth well beyond
that of the general connector market. Some legacy connector types, for
instance, are being adapted to high-speed differential signaling, which
will allow implementation in next-generation equipment. In other cases,
entirely new interfaces will show logarithmic percentage growth from
near zero as they are implemented in new high-volume applications.
For a
complete overview of the this report,
click here.
If you would like to place an order for this report, go to our order form.
|
|
Report
# TD-501-10
GPS Navigation
Market - Portable Navigation Devices
Print Copy
$2,500
Print Copy + 1 Additional Print Copy $2,750
Print Copy + CD (Multi-User Corporate License) $3,250
Published January 2010
Bishop & Associates has
just released a new 5 chapter research report
focusing on the GPS
navigation market. The key objective of this report is to predict GPS
product Bill-of-Materials (BOM) design and trends over the next 3 years,
starting with bench marketing present BOM teardown data. The challenge
is to forecast the next generation BOM designs requirements, future
market trends and emerging GPS markets segments that will impact to
connector and cable requirements.
The new report provides a
market snapshot analysis (present and future) market value and volumes
from 2010 to 2014.
In defining market and product
characteristic of the GPS market, this report will focus on consumer
mobile GPS devices that make up the major market share of the global GPS
products in 2010.
Key Definitions of terms:
GPS: Global Position System
PND: Portable Navigation Device
LCD: Liquid Crystal Display
LBS: Location Based Services
PCB: Printed Circuit Board
TAM Total Available Market
A key market factor is the GPS
market is growing through mobile phone companies adding GPS
mapping/direction into smart cellular phones to get additional monthly
fees from the consumer. At the same time Portable Navigation Device (PND)
market is becoming mature but will not be crushed by the trend of smart
phones having GPS features.
For an overview of
this new report, click here.
If you
would like to place an order for this report, go to our order form.
|
|
Report # M-1025-09
The
World Connector Market for Renewable Energy - Wind and Solar
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published November 2009
Bishop & Associates has
just released a new 7 chapter research report defining the World
Connector Market for Renewable Energy. The report profiles the Wind
and Solar segments of the global market and outlines the major
product types, connector categories, connector types, as well as
projecting annual connector sales and forecast for each market
segment and regions of the world. The forecast will detail each
specific connector category and connector type. While there may be
some reference made to electrical components, this report will focus
on the electronic connector content only.
Today we are facing huge challenges: global warming, depleting
natural resources, population growth, increasing energy demand,
rising energy prices and unequal distribution of energy sources. All
of these factors contribute to the urgent need to transform the
energy sector, which primarily relies on fossil fuels, to one that
uses renewable energies and energy efficient technologies.
Renewable energy is defined as the energy derived from resources
that are regenerative, or for all practical purposes, cannot be
depleted. Resources include biofuels, biomass, hydroelectric power,
geothermal energy, solar energy, wind power, ocean thermal energy,
wave power, and tidal power. The global renewable energy market
grew by 20.4 percent in 2008 to reach a value of $310.5 billion and
is forecast to have a value of $511.3 billion in 2013, an increase
of 64.7 percent since 2008.
For an overview of
this new report, click here.
If you
would like to place an order for this report, go to our order form.
|
|
Report# RM-1050-09
Post-Recession Outlook of the Electronics Industry and Connectors –
Roadmap 2009-2019
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published October 2009
Bishop and Associates has just released a seven chapter, 197 page report
providing an in-depth analysis for the “Post-Recession Outlook of the
Electronics Industry and Connectors – Roadmap 2009-2019”.
This new report is a roadmap study of the electronics industry and
connectors, with 90 tables and many photos and illustrations. Taking off
from work done on the 2009 iNEMI Roadmap, this study analyzes major
elements of the electronics industry that parallel, intersect and
influence connectors, and looks at the connector industry’s markets,
technology and forecasts major product roadmaps from 2009-2019. Compiled
during, and influenced by the 2008-2009 recession, the report analyzes
how the industry will move forward from the current point in time, and
forecasts markets from 2007-2013 and gives a long-range outlook to 2019,
including the impact of a slowing IC technology – a critical driver for
connector technology and demand.
Deep recessionary forces facing electronics were caused by forces
external to the industry – not by boom and bust cycles in the industry
such as happened in 2000. The 2008-2009 recession was caused by a crisis
in the financial and housing sectors, followed by a credit crunch and
stock market plunge that shut off demand for products and services.
Connector Market by Equipment Segment - 2007-2013
For an overview of
this new report, click here. If you
would like to place an order for this report, go to our order form.
|
|
The World
Distribution Market for Connectors
Report # D-100-10
Print Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published November 2010
Bishop and Associates has just released a new nine-chapter
research report analyzing the World Distribution Market for Connectors.
This 329-page report provides a comprehensive analysis of the
distribution market for connectors through both the POP (connector
manufacturers’ sales to distributors) and POS (distributor sales to OEMs
and CEMs) channels. POP and POS sales are provided for the years 2004
through 2010, and a 2014 forecast.
Distribution accounts for a large share of the
connector market.
The world connector industry will achieve sales of $42,956 million in
2010, an increase of +24.9 percent over 2009. Distribution will account
for 21.8 percent of the world market this year. In regions with
well-established distributor presence and business models such as Europe
and North America, distribution accounts for 31.2 percent and 32.5
percent of total sales respectively.
The following table identifies the size of the 2010 distribution
connector market (POP) by geographic region.
2010
Distribution Connector Sales by Region
With Percent of Total Region Sales
Distribution’s share of the connector
market has increased steadily from 2004, when it accounted for only 19.1
percent of world connector sales. In our opinion, distribution’s share
of the total market will continue to increase as customers in fast
growing economies, such as China and India, embrace the value
proposition that distribution provides.
For a overview of this research
report, click here. If you would like
to place an order for this report, go to our
order form.
|
|
Research Report
M-607-09
The
World Industrial Market For Connectors
Print Copy
$3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published July 2009
Bishop and Associates,
Inc. has just released a new ten chapter,
179 page research report providing a qualitative and quantitative
analysis of the
World Industrial Market
for Connectors. Connector sales
and forecasts for the years 2008 through 2013 are provided by end
use equipment market segments, by product type and by region of the
world. The report provides both overall quantitative data as
detailed background information, trends and dynamics, on selected
market segments such as wind and solar energy, Industrial Ethernet,
Robotics, Semiconductor Production Equipment and others.
2008 Industrial Market for Connectors by Region
For a
complete overview of the this report,
click here.
If you would like to place an order for this report, go to our order form.
|
|
Report # P-889-09
Evolving High
Speed Mezzanine Connectors
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published May 2009
Bishop and Associates,
Inc. has just released a new 12-chapter, 214 page research report
providing a complete analysis of evolving high-speed mezzanine
connectors. Current connector market values and forecasts are provided
by bandwidth, region of the world, and end user market for the years
2007, 2008, 2009, and 2013.
Mezzanine architecture offers significant packaging advantages. System
density has become a critical issue for circuit designers and can be
increased by utilizing the space between daughtercards. Products can be
effectively partitioned to provide pluggable modules simplifying repair,
customization and upgrading. Printed circuit board routing issues can be
simplified and layer count reduced by spreading functions over larger
board surface areas.
For a overview of this research report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # P-975-08
World RF Coax
Connector Market
Print Copy
$2,950
Print Copy + 1 Additional Print Copy $3,245
Print Copy + CD (Multi-User Corporate License) $3,835
Published November 2008
Bishop and Associates has just
released a new report providing a complete analysis of the World RF Coax
Connector Market. This new report furnishes detailed 2006/2007 sales
statistics for 11 end-use equipment markets, as well as five-year
projections to the year 2012. Expanded coverage of 10 major coax types
is supplied and profiles of leading manufacturers are exhibited. This
report provides all the key data needed to analyze the World RF Coax
Connector Market.
The RF connector market is nearing $2.0 billion worldwide, growing an
average of 10.8 percent per year since 2002. Demand for RF products has
been driven by the growing demand for mobile and wireless communications
in the commercial and military markets and the telecommunications and
data communications markets. By 2012, RF connectors will reach $3.0
billion in annual sales.
In 2007, the world RF market totaled $1,879 million, increasing 7.5
percent from 2006 sales of $1,749 billion. For the first time, Europe
consumed more RF connector than North America. As expected, China and
ROW are the fastest growing markets for RF connectors, increasing 2007
sales by 16.8 percent and 17.5 percent respectively.
For a overview of this research report,
click here. If you would like to place an order for this
report, go to our order form.
|
|
Report # M-1110-08
Overview of
the Chinese Connector Market
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published October 2008
Bishop
and Associates has just released a new 218 page, five-chapter report
providing an Overview of the Chinese Connector Market. This report
analyzes all aspects of the Chinese connector market including detailed
connector statistics by equipment sector and product category for the
years 1999 2007. This new report also provides an in-depth, and detailed
forecast of the Chinese connector Industry for the years 2008-2012.
In addition, the report analyzes of the top 40 connector manufacturers
serving the Chinese market, and provides profiles for seventy China
based connector manufacturers. Also included, is a chapter on worldwide
connector industry results by region for the years 2006-2007.
China is the third largest connector region of the world, and totaled
$7.022 billion in connector sales during 2007. China achieved a
year-over-year sales growth of +16.8 percent. Over the past thirteen
year period, China has achieved a compound average growth rate of +38.7
percent.
Chinese Market Year-to-Year Growth 1981-2007
For a overview of this research report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # P-675-08
Optic Connectors Challenging Copper
in I/O Applications
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published July 2008
Bishop
& Associates has just released a new 14 chapter research report
exploring the technology of both electrical and optic communication
links, and compares the relative advantages and disadvantages of each in
I/O applications. Connector sales data is provided for the years 2006,
2007, 2012 forecast, and five-year CAGRs.
Copper cables have historically been the primary media that allowed electronic systems to communicate. Copper cabling systems have evolved over the years to enable increasing bandwidth as system speeds increased. Cable constructions including coaxial, and shielded twisted pair along with advanced signaling devices have pushed the performance capabilities of copper Input / output cables to multigigabit speeds. Prediction of copper bandwidth limitations has consistently proven inaccurate as designers find ways to enable copper links to satisfy their performance requirements. Copper cable assemblies are an established technology that permits easy repair in the field using common tools. A variety of industry standards define copper interfaces that enable equipment connectivity, an essential feature of many of today’s electronic products.
For an overview of this new report, click here.
|
|
Report #
R-2015-08
The Future of
Electronics Manufacturing in North America - Impact on Connectors
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published January 2008
Bishop and Associates has just released a new six-chapter research
report, The Future of Electronics Manufacturing in North America –
Impact on Connectors. This new report profiles the North American
electronics manufacturing industry and its electronic connector market.
Some elements of this report were several years in the making, drawing
on our analyst’s long experience in the electronics industry, North
America’s multiple phases of off-shoring, outsourcing, and involvement
in government/industry initiatives that have attempted to address the
globalization issue as it impacts the domestic manufacturing market, yet
strengthens North American OEM’s global competitiveness.
The report’s foundation includes eight years of experience compiling the
Connector Roadmap with the International Electronics Manufacturing
Initiative. It also includes extensive experience in the industry,
including NIST’s Advanced Technology Program, the Department of Commerce
and Census Bureau data, IEEE National Innovation Forum, DARPA, and other
U.S. competitiveness initiatives.
Main Points of Interest
Continuing trends in outsourcing and off-shoring.
Growth in emerging markets, particularly China.
Low-to-negative growth in some domestic markets (based on where
equipment is manufactured).
Issues relating to domestic manufacturing infrastructure.
Detailed connector industry forecasts and cyclical scenarios.
Potential government and private sector actions.
For a overview of The Future of
Electronics Manufacturing in North America - Impact on Connectors,
click here. If you would like to place an order for this report, go to our order form.
|
|
Report #
C-122-11
2011 Connector Industry
Yearbook
Yearbook - Print Copy @
$1,250 - With Yearbook CD $2,000.
Yearbook - Print Copy + 1 Year Bishop Report Subscription @ $1,450 -
With Yearbook CD $2,200.
1 Year Corporate Subscription for The Bishop Report and Yearbook @
$2,750 (Unlimited Number of Subscribers and 1 Print Copy of the
Yearbook) - With Yearbook CD $3,500.
Published September 2011
Each year, Bishop & Associates prepares the
Connector Industry Yearbook based on annual reports provided by publicly
traded connector companies. Income statements and balance sheets are
consolidated for the past ten (10) years, (5) years, and most current
year, providing benchmarks on the industry and the overall performance
of the public connector companies. Featured in each issue are:
Consolidated history of the public companies including:
|
Key Financial
Measurements (2000-2010) Balance Sheet $ (2000-2010) Income Statement $ (2000-2010) Balance Sheet percent (2000-2010) Income Statement percent (2000-2010) |
Fifteen-year history of performance by company, with industry averages for the following financial measurements:
|
Selected Connector
Manufacturers Selling, General, & Administrative percent (1996-2010) Net Income percent (1996-2010) Return on Assets (1996-2010) Long Term Debt/Equity (1996-2010) Accounts Receivables Turnover (1996-2010) Inventory Turns (1996-2010) Cost of Goods Sold percent (1996-2010) COGS + SG&A percent (1996-2010) Current Ratio (1996-2010) Return on Equity (1996-2010) Liabilities to Equity (1996-2010) Average Collection Period (1996-2010) Days Inventory (1996-2010) |
For a overview of The Connector Industry YEARBOOK, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # P-505-07
World IC
Socket Market
Print Copy
$1,750
Print Copy + 1 Additional Print Copy $1,925
Print Copy + CD (Multi-User Corporate License) $2,275
Published September 2007
Bishop and Associates has just released a new report providing a
complete analysis of The World IC Socket Market. This new report
furnishes detailed 2005/2006 sales statistics for both production IC
sockets and test/burn-in sockets. Sales by end-use equipment markets are
also provided, as well as five-year projections to the year 2011.
Expanded coverage of twelve major socket types is supplied and profiles
of leading manufacturers are exhibited. This report provides all the key
data needed to analyze the World IC Socket Market.
World demand for IC Socket connectors reached $1,888 million in 2006, up
+14.1 percent from the 2005 total of $1,655 million. IC Socket
represented 4.7 percent of the total 2006 connector market of $35.5
billion.
The IC socket market will increase to $2,844.4 million in 2011, a
five-year CAGR of 8.5 percent. In 2011, the IC socket market will
increase to 4.8 percent of world connector demand.
For a overview of The
World IC
Socket Market ,
click here. If you would like to place an order for this report, go to our order form.
|
|
Report # M-800-07
World Computer & Peripheral Market Report
Print Copy
- $3,500
Print Copy + 1 Additional Print Copy - $3,850
Print Copy + CD (Multi-User Corporate License) - $4,550
Published January 2007
Bishop and Associates
has just released the new nine-chapter research report analyzing the World
Computer and Peripheral Market. This comprehensive report provides detail on
all aspects of the world computer and peripheral market, including connector
statistics for the years 2006-2011 (including five-year CAGRs), and
projections to the year 2016.
This report analyzes Computers & Peripherals worldwide and their connector
usage including:
Estimates of equipment & connector volume 2001-2016 in units and dollars.
Forecasts by market segment and region of the world.
Equipment segments include mobile, desktop, server, HPC, storage, LAN,
peripheral equipment and other. Categories include:
PDA/communicator, notebook/tablet, desktop, motherboard, peripheral
equipment, entry level/blade server, midrange, enterprise server, mainframe,
workstation, high performance & technical computers (HPC), SAN/NAS/SAS HDD
storage, desktop LAN equipment & boards, single board/embedded computers,
and others.
Connector volume is provided by I/O, internal board-to-board, and other
connector and cable connector/assembly categories.
For a overview of this research report,
click here. If
you would like to place an order for this report, go to our order form.
|
|
Report P-405-06
Rectangular
I/O Connector Market
Print Copy
$1,950
Print Copy + 1 Additional Print Copy $2,145
Print Copy + CD (Multi-User Corporate License) $2,535
Published November 2006
Bishop and Associates
has just released a new report providing a complete analysis of The
World Rectangular I/O Connector Market. This new report furnishes
detailed statistics for over 85 rectangular product lines by 2004/2005
total sales. Sales by end-use equipment markets are also provided, as
well as five-year projections to the year 2010. Expanded coverage of
fifteen major product categories is supplied and profiles of leading
manufacturers are exhibited. This report provides all the key data
needed to analyze the World Rectangular I/O Connector Market.
World demand for rectangular I/O connectors reached $5,984 million in
2005, up +6.5% from 2004’s total of $5,619 million. Rectangular I/O
connectors represented 16.9% of the 2005 $35.5 billion connector market.
The rectangular I/O market will increase to $10.077 million in 2010, a
five-year CAGR of 11.0%. In 2010, the rectangular market will represent
17.3% of world connector demand.
For a
complete overview of the this report,
click here.
If you would like to place an order for this report, go to our order form.
|
|
Report M-725-06
Emerging
Connector Markets In Central & Eastern Europe
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published September 2006
Bishop & Associates has just
released a new eight-chapter research report analyzing the Emerging Connector
Markets in Central and Easter European (CEE). This report provides a
comprehensive analyses of the Central & Eastern European connector market
detailing connector consumption by country with details by end-use equipment
sector, and connector product category. Sales are provided for 2005, and
forecasts for the year 2010.
The connector market for Central and Eastern Europe, including Russia, is
achieving excellent growth and is becoming an attractive market for
connector manufacturers. In 2005, the region represented approximately 10
percent of the total European connector market. This share will grow to
almost 15 percent by the year 2010. The anticipated five-year Compound
Annual Growth Rate (CAGR) for the CEE connector market is close to 12
percent. In comparison, the Western European connector market is expected to
grow at a modest CAGR of just over 3 percent during the same period.
For a
complete overview of the this report,
click here.
If you would like to place an order for this report, go to our order form.
|
|
Report
P-881-09
Evolving High
Speed Connectors
Print Copy
$4,500
Print Copy + 1 Additional Print Copy $4,850
Print Copy + CD (Multi-User Corporate License) $5,850
Published March 2009
Bishop and Associates,
Inc. has just released a new 13-chapter research report providing a
complete analysis of Evolving High-Speed Connectors. This new report
details backplane, midplane, and high-speed backplane cable assemblies.
Connector values are provided for each category for the years 2007,
2008, 2009, and 2013, as well as region of the world.
Connectors designed to operate in multi-gigabit applications have
proliferated over the past four years providing system designers greatly
expanded interconnect options and performance levels. Advances in
connector as well as signal conditioning technology have pushed
interface bandwidth from 3 Gb/s to 20+ Gb/s, with at least one supplier
introducing a 40 Gb backplane connector. This market research report
addresses the many aspects of the high-speed interconnect market from
what is driving demand for faster channels, to defining the key
characteristics of the leading connector families that are currently
available. Detailed market estimates and forecasts extending to 2013
for backplane and cable connectors by application and region of the
world are featured.
A variety of factors associated with high-speed channels have a major
influence on their behavior. Chapters are devoted to reviewing related
system elements including driver and receiver technology, printed
circuit board materials, as well as channel modeling, and performance
measurement systems.
A new chapter focused on innovation provides examples of new creative
approaches to addressing some of the challenges associated with
interconnection and packaging of next generation electronic equipment.
This market research report also includes several tutorial chapters on
connector and high-speed design issues that enable a non-technical
reader to gain from the information provided.
For a complete overview of the this report, click here. If you would like to place an order for this report, go to our order form.
|
|
Research Report T-990-08
Connector Imperatives to Support Next Generation Electronic
Equipment
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published January 2008
Bishop and Associates has
just released a new eight-chapter research report analyzing
Connector Imperatives to Support Next
Generation Electronic Equipment.
This new report identifies emerging electrical, mechanical and
economic attributes of connectors anticipated by the electronic
system design community as well as provide examples of new products
connector suppliers have released or are developing in order to
address these emerging needs. The report is focused on three
industry segments that are experiencing the most rapid and dramatic
changes, and represent some of the most fertile markets for
innovation in connector technology (Computers, Telecom and
Automotive). Statistics are presented showing historical and
forecast connector shipments for the years 2005, 2006, 2007 and
2011.
The key objectives of this new report are to identify specific
attributes of electronic connectors as reported by the connector
using community, and to compare them with new development work as
well as recently released connectors from the connector
manufacturing industry. Product extensions of existing features as
well as new capabilities are reviewed.
For an overview of this new report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report # P-610-11
The World
Market For Terminal Blocks
Print Copy
$2,750
Print Copy + 1 Additional Print Copy $3,025
Print Copy + CD (Multi-User Corporate License) $3,575
Published July 2011
This new seven chapter research report from Bishop & Associates, Inc.
provides a complete analysis of The World Market for Terminal Blocks.
This report thoroughly analyzes all product categories including:
|
Sectional Blocks (Modular) NEMA IEC DIN Rail Others Power Blocks |
Barriers Single Row Double Row |
PCB Mount Blocks Single Piece Fixed Two Piece Pluggable Others All Other Blocks |
This new report furnishes 2010 detailed statistics
on the world terminal block market by product type, geographic region,
and end-use market sector. The report also forecasts the world terminal
block market for the years 2011 and 2015.
End-Use Equipment Analyzed in this Report
Include:
|
Business Equipment Power Supplies Instruments Transportation Equipment |
HVAC (Heating,
Ventilating & Air Conditioning) Industrial Controls Telecom Equipment All Other Industries |
For an overview of this new report, click here. If you would like to place an order for this report, go to our order form.
 |
Report # T-800-04
Major New
Connectors Initiatives - Technologies Changing The Industry
Print Copy $2,950
Print Copy + 1
Additional Print Copy $3,245
Print Copy + CD (Multi-User Corporate License) $3,540
Published May 2004
Bishop and
Associates, Inc. has just released a research report providing a concise
description of the major new connector Initiatives and their impact on
technology driving the connector industry. The objective of this report
is to create a resource for the understanding of the new technologies,
their purpose and uniqueness, and to provide a basis for determining
their viability in an ever-changing world of electronic systems.
This report supplies essential information needed to understand each
technology and to access opportunities around each technology. Many of
these technologies were originally developed for the computer industry,
but they also impact both the consumer and telecom market. The long
awaited convergence has begun and developments in one part of the
marketplace can permeate others.
In addition, the report provides the sales volume for each connector
along with the rationale behind its importance to the industry. The
report is organized by individual technology and provides both an
executive summary of each technology and a more in depth analysis of
each.
For an overview of
this new report, click here.
If you would like to place an order for this report, go to our order form.
|
|
Report # P-635-10
The Market for
Filtered Connectors in Commercial and Military Applications
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published July 2010
Bishop and Associates
Inc. has just released a new 14 chapter market research report
providing a detailed analysis of connectors that feature the
capability of mitigating the negative effects of electromagnetic
interference (EMI) and/or electrostatic discharge (ESD).
The proliferation of electronic devices in both military as well as
in the consumer market has made the management of EMI and ESD issues
a key consideration early in the new product design cycle. Filtered
connectors are available in circular and rectangular configurations,
and utilize a variety of filter technologies including chip
capacitors, tubular, and planar.
This new report addresses the most common filtered connector types
in use today including a variety of military / aerospace circulars,
Mil-C-24308 Subminiature D connectors and ARINC connectors.
For an overview of
this new report,
click here.
If you would like to place an order for this report, go to our order form.
|
|
Report
# A-1010-08
World
Automotive Connector Market
Print Copy
$4,500
Print Copy + 1 Additional Print Copy $4,950
Print Copy + CD (Multi-User Corporate License) $5,850
Published April 2008
Bishop and
Associates has just released a new eighteen-chapter research report
covering the World Automotive Connector Market. This new report
provides a comprehensive analysis of the automotive connector
market, identifying the size of the market by vehicle platform,
product type, contact size, and region of the world for light
vehicles. Market data is displayed for the years 2006, 2007, 2008,
2009 and 2012.
Light Vehicles covered in this report are defined as Cars and Light
Trucks. Light Trucks include Sport Utility Vehicles (SUV’s) and
Pickup Trucks with a load rating of one ton or less.
Vehicle Systems
Vehicle systems covered in this report have been
segmented into 5 major categories. Each of these categories have
been broken down into specific subsystems:
For an
overview of this new report,
click here. If
you would like to place an order for this report, go to our order form.
|
|
Report# P-650-03
World Market For
2mm Backplane Connector Systems
Print Copy $2,750
Print Copy + 1 Additional Print Copy $3,025
Print Copy + CD (Multi-User Corporate License) $3,300
Published June 2003
Bishop & Associates, Inc. has just published a new seven chapter
research report providing a complete analysis of The World Market for
2mm Backplane Connector Systems. This report provides detailed
statistics on the world 2mm backplane connector market by product type,
geographic region and end-use market sector for the years 2001 and
2002. Five-year forecasts are also provided for the year 2007.
For an overview
of this new report, click here. If
you would like to place an order for this report, go to our order form.
|
|
Report # M-1501-10
Medical
Electronics Market for Connectors
Print Copy $3,950
Print Copy + 1 Additional Print Copy $4,345
Print Copy + CD (Multi-User Corporate License) $5,135
Published August 2010
Bishop and
Associates, Inc. has just released a twelve chapter research report
providing a comprehensive analysis of the world medical electronics
market detailing connector consumption by geographic region, medical
equipment segments, medical equipment types and connector product types.
The market volumes for the Medical Electronics market for connectors in
years 2008, 2009 and 2014 are summarized by:
Region
Medical Equipment Segment
Medical Equipment Type
Connector Product Type
An in-depth analysis of the various market segments within the medical electronics market for connectors is provided. Due to the diversity of applications and different dynamics of each segment, we will focus more closely to specific applications and modalities representing growth opportunities for connector manufacturers actively selling into these markets. These include:
Imaging Equipment
Patient Monitoring and Diagnostic Equipment
Therapeutic Equipment
Analytical and Surgical Equipment
Consumer Medical Devices
Chapters specific to these segments identify connector content and opportunities, as well as:
Market Conditions
Market Drivers
Key Players
Technology
Applications / Equipment Types
For a overview of this research report, click here. If you would like to place an order for this report, go to our order form.
|
|
Report
# P-660-07
Power Connectors for the
Computer & Communication Markets
Print Copy
$3,500
Print Copy + 1 Additional Print Copy $3,850
Print Copy + CD (Multi-User Corporate License) $4,550
Published March 2007
Bishop and Associates has just released the new ten-chapter research
report analyzing Power Connectors For The Computer And Communications
Markets. This comprehensive report provides detail on all aspects of the
computer and communication power connector market, including connector
statistics by region, market, power rating and connector type the years
2005-2006 and 2011 (including five-year CAGRs).
Beyond detailing the factors that are driving the increase in power
demand, this new report includes detailed data covering contact physics,
power connector types, test methodology, the status of industry
standards that define power connectors, as well as connector failure
mechanisms. The issue of thermal management along with current and
anticipated cooling options is discussed. A detailed review of existing
as well as recently introduced power connectors from 17 leading
suppliers is also included. For a overview of this research
report, click here. If you would
like to place an order for this report, go to our order form.
|
|
|
Copyright © 2012, Bishop &
Associates Inc. |
|
|